IPTP

• High-brightness 3-digit display with 20 mm digit height and 13 mm decimal digit;

• Measurement range from 0 to 50 positions (0 to 5000 ohms), maximum step of 100 ohms;

• Potentiometric ring signal input (mA or resistive);

• Universal 48 to 265 VDC/VAC power supply;

• RS485 digital output (ANSI/TIA/EIA-485-A) with Modbus RTU and DNP 3 (Level 1) protocols for remote access to all measured parameters;

• Analog output of 0 to 1, 0 to 5, 0 to 10, 0 to 20 and 4 to 20 mA, configurable from the front panel;

• Front USB Type-C port for parameter configuration using UseEasy™ software;

• Stores the maximum and minimum tap positions reached during the period in memory;

• Contact for fault indication (Watchdog);

• Tap raise and lower commands directly from the front panel or via RS485;

• 2 NO contacts for raising and lowering the tap position;

• 3 contacts for remote monitor status indication;

• 2 contacts for remote access programming;

• High mechanical strength enclosure made entirely of aluminum;

• IP20 degree of protection (NBR IEC 60529);

• Auto Baud Rate from 2400 to 57,600 bps (automatically detects the communication network speed);

• High mechanical strength enclosure made entirely of aluminum, DIN IEC 61554 standard;

• Compact dimensions: 98 x 98 x 52 mm;

• 2-year warranty;

Operating temperature: -40 to +85°C

Power consumption: < 15 W

Tap position measurement input: 0 to 5000 ohm resistive ring; 0 to 20 mA or 4 to 20 mA transducer

Measurement range: -50 to 50 tap positions – Programmable (50 positions)

Maximum analog output error: 0.25% of full scale

Output contacts: 4 – Potential-free

Maximum switching power: 70 W / 250 VA

Maximum carrying current: 6.0 A

Serial communication port: RS-485 (ANSI/TIA/EIA-485-A)

Serial communication port: Modbus RTU and DNP 3 Level 1

Auto Baud Rate: 2400 to 57600 bps

Enclosure (DIN EIC 61544): 98 x 98 x 52 mm – Aluminum

Device mounting: Flush panel mounting

Degree of protection (NBR IEC 60529): IP 20